Maa Enterprises

Backed by our rich industrial experience in this domain, we are able to manufacture high-quality Milking Machine. The offered machines are highly applicable for robotic milking in a number of dairy farms. These machines are manufactured with sophisticated and modern machines to make it suitable for performing milking process automatically. The offered machine perform the whole task in various stages like collecting, routing animals into the parlor , inspection and cleaning, massaging, extracting milk, removing milk equipment, and then routing of animals out of the parlor.

Features:

• Reliability
• Safe to use
• Maximum output

Additional Information:

• Delivery Time: 2 Days

• Centrifugal bowl is made of Stainless Steel AISI 304.
• Collecting Cover and Float of AISI 304. Bowl is dynamically balanced.
• Lubrication system is completely eliminated. Unique drive system consists of special High Torgue motor of 1.0 HP and flat belt drive, has eliminated the necessity of drive gears lubrication and friction clutches.
• Due to absence of friction clutches there is no slippage for worn out friction pad and tachometer is not required. • Rubber gasket which comes in contact with milk is resistant and non-absorbent.

PURPOSE: To recover valuable milk fat being drained 5000 LPH CAPACITY, 7.5 HP , 1440 RPM ,50-60HZ, 415 VOLTS , THREE PHASE MOTOR 

Additional Information:

• Delivery Time: 30 DAYS
• Packaging Details: WODDEN BOX

• The concept of machine milking should be introduced slowly and by persons who the cattle are used to and feel comfortable with under the supervision of an expert.
• Training of milkers should be done by a person from the milking machine company. This person has good knowledge about biology of milking, machine milking as well as with the design, function and maintenance of the milking equipment. The training should include introduction procedures, milking routine, handling of the machine, cleaning and maintenance as well as certain aspects of the day-to-day service of the machine.
• Installation of the milking machine and any other modification in the dairy farm should be made well in advance of the changing to machine milking.
• It is most appropriate to start with heifers since it is easier to habituate heifers than older cattle to machine milking.
• Calm animals that are comfortable with hand milking should be selected. The udders and teats of the animals should be uniform with respect to conformation and size. Cattle in heat or unhealthy animals or animals with previous let-down-problems should not be selected.
• Milk the old and selected animals as usual by hand but let the vacuum pump run during milking. This will make the animals accustomed to the noise. Put the pump on before actual milking, but after the cattle have been tied up, otherwise the animals may be startled by the sudden noise. Repeat the procedure (usually 2 to 4 times) until all cattle are accustomed to the noise.

Additional Information:

• Delivery Time: 30 DAYS
• Packaging Details: WOODEN BOX

Additional Information:

• Delivery Time: 30 DAYS
• Packaging Details: WODDEN BOX

• Suitable for large or small, pasture or stall rearing
• Entirely designed and produced by Milkline
• Made in Italy: high-quality and durable components
• Easy handling and cleaning
• Available for cows, buffaloes

Additional Information:

• Delivery Time: 30 DAYS
• Packaging Details: WOODEN BOX

• Production Capacity1000 Pouch/Hour
• Automation GradeAutomatic
• Packaging TypePOLY FILM
• PowerTHREE PHASE
• Driven TypeElectric
• Programmable Logic Controller ( PLC )YES

Additional Information:

• Production Capacity: 5 PER MONTH
• Delivery Time: 20 DAYS
• Packaging Details: AS PER CUSTOMER REQUIREMENT

• Centrifugal bowl and Inlet & Outlet flow units are made of stainless steel AISI 304.
• Bowl & all high speed revolving components are dynamically balanced.
• All parts in contact with milk are made of Stainless Steel AISI 304.
• Provision for Cream regulation & standardization device.
• Lock ring of Bowl is made with special carbon steel with anti corrosive treatment.
• Centrifugal Clutch drive system for smooth running.
• Heavy Cast Iron Base frame.
• Separator is supplied with foundation shock observing pads, spanner Set, Spare Part Set & oil Lubrication for first Charge.

• Micro-Controller based embedded design
• RFID for customer identification
• Direct interface
• Milk Analyzer to get date-Weight (Kg/tr) FATSNFWadded water

• Keyboard with in-built DPU In-built Thermal printer
• Date transfer through USB Flash Drive/GSM/GPRS 2 Rate chart storage facility
• Print/View shift report with weighted average
• Store data up to 12 months
• Auto TARE (Zero)
• Available in different models and as per customer requirements

Additional Information:

• Production Capacity: 150 MACHINES PER MONTH
• Delivery Time: 30 DAYS
• Packaging Details: WOODEN BOX

• Type Of BeverageMILK
• MaterialMADE FOR SS 304
• Model Name/NumberJMD
• Product TypeLoose Beverages
• Country of OriginMade in India
• Flavours DispensedTONED MILK